← NSN Search
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-00-583-5152NIIN 005835152InternationalEA · inactiveDEMIL ASOS SMSCatalog $1
FSC5905Resistors
Suppliers
6
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
00737SESCO ENGINEERING AND SUPPLY CORPKANSAS CITY, MOSAM
PN RA20NASD500A
02032HOLLINGSWORTH JOHN R COPHOENIXVILLE, PASAM
PN 4832-2-135-1
14100STROMBERG-CARLSON CORP A PLESSEYLAKE MARY, FLSAM
PN 697139-500
76055MALLORY CONTROLS CO SUB OF EMHARTFRANKFORT, INSAM
PN RA20NASD500A
81349MILITARY SPECIFICATIONSSAM
PN MIL-PRF-19/2, MIL-R-19, RA20A1SD500AK, RA20NASD500A
82577RAYTHEON COMPANYEL SEGUNDO, CASAM
PN 4171780-005
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| BODY DIAMETER | INCHES MINIMUM 1.100 AND INCHES MAXIMUM 1.310 |
| BODY LENGTH | INCHES MINIMUM 0.570 AND INCHES MAXIMUM 0.670 |
| DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 9:00 OCLOCK |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 290.0 AND MAXIMUM 305.0 |
| ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 50.0 |
| MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.390 |
| MOUNTING METHOD | STANDARD BUSHING |
| NONTURN DEVICE RADIUS | INCHES MINIMUM 0.516 AND INCHES MAXIMUM 0.546 |
| OVERALL DIAMETER | INCHES NOMINAL 1.750 |
| OVERALL LENGTH | INCHES MINIMUM 1.414 AND INCHES MAXIMUM 1.576 |
| POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 290.0 AND MAXIMUM 305.0 |
| SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| SHAFT LENGTH | INCHES MINIMUM 0.844 AND INCHES MAXIMUM 0.906 |
| SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-19 TO 2 |
| TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-19 |
Open buys
SPE7M526T512P
DIBBS · quotes by Sep 28, 2026 · UNRESTRICTED