← NSN Search
CONNECTOR,RECEPTACLE,ELECTRICAL
5935-00-724-4418NIIN 007244418InternationalEA · activeDEMIL ASOS SMSCatalog $119
FSC5935Connectors, Electrical
Suppliers
2
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
81349MILITARY SPECIFICATIONSSAM
PN MIL-DTL-26482, MILC0026482
96906MILITARY STANDARDSSAM
PN MS3127E22-55P
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES NOMINAL 1.250 |
| CONNECTOR LOCKING METHOD | BAYONET PIN |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 600.0 |
| CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING REMOVABLE |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 1.250 |
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.556 AND INCHES MAXIMUM 0.587 |
| ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| INCLUDED CONTACT QUANTITY | 55 |
| INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| INSERT POSITION IN DEG | 0.0 |
| MATING END QUANTITY | 1 |
| OVERALL HEIGHT | INCHES MAXIMUM 1.766 |
| OVERALL LENGTH | INCHES MAXIMUM 1.328 |
| OVERALL WIDTH | INCHES MAXIMUM 1.766 |
| POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | CADMIUM |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| SHELL TYPE | SOLID |
| SPECIAL FEATURES | FOUR 0.150 IN. DIA INTERSECTED MTG HOLES SPACED 1.375 IN. BY 1.375 IN. |
| SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-26482 |
| TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING CRIMP |
| TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-26482 |
| UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.125 |
Open buys
SPE7M526T512M
DIBBS · quotes by Sep 28, 2026 · UNRESTRICTED