← NSN Search
SWITCH,ROTARY
5930-01-029-3637NIIN 010293637USAEA · activeDEMIL ASOS SMSCatalog $1,066
FSC5930Switches
Suppliers
5
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
10001NAVAIR AND NAVSEA MANAGED ORIGINALWASHINGTON, DCSAM
PN 3179732-3
31649M-TRON MFG CO INCSAN FERNANDO, CASAM
PN 3600-4394
36090LOCKHEED MARTIN LIBRASCOPEGLENDALE, CASAM
PN T507011303
81073GRAYHILL INCLA GRANGE, ILSAM
PN 3179732-3
91812JANCO CORPORATIONRANCHO CASCADES, CASAM
PN 3179732-3
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| CONTACT LOAD CURRENT RATING | AC AT SEA LEVEL AMPERES RESISTIVE LOAD 1.3 |
| CONTACT SWITCHING ACTION | EACH SECTION REAR BREAKS BEFORE MAKES |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 |
| FIRST FLAT LENGTH | SINGLE ACTUATOR INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| FLAT HEIGHT | SINGLE ACTUATOR INCHES NOMINAL 0.216 |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| INDIVIDUAL SECTION QUANTITY | 4 |
| MOUNTING METHOD | SINGLE MOUNTING FACILITY THREADED BUSHING WITH PANEL SEAL |
| NOMINAL THREAD SIZE | SINGLE MOUNTING FACILITY INCHES 0.375 |
| NONTURN DEVICE TYPE | AT 3:00 OCLOCK SLOTTED BUSHING |
| OPERATING TEMP RANGE | CELSIUS -65.0 TO 125.0 |
| OVERALL DIAMETER | INCHES MINIMUM 1.000 AND INCHES MAXIMUM 1.306 |
| OVERALL LENGTH | INCHES NOMINAL 2.937 |
| POLE QUANTITY | 2 |
| ROTOR THROUGH CONNECTION QUANTITY | 2 |
| SHAFT DIAMETER | SINGLE ACTUATOR INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| SHAFT LENGTH | SINGLE ACTUATOR INCHES MINIMUM 0.417 AND INCHES MAXIMUM 0.457 |
| SHAFT TYPE | SINGLE ACTUATOR ROUND, FLATTED |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 3 |
| SWITCH ACTUATOR POSITIONING INCREMENT | SINGLE ACTUATOR DEGREES 45.0 |
| SWITCH ACTUATOR STOP DEVICE TYPE | SINGLE ACTUATOR FIXED STOP |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| THREAD CLASS | 2A |
| THREAD LENGTH | SINGLE MOUNTING FACILITY INCHES MINIMUM 0.417 AND INCHES MAXIMUM 0.457 |
| THREAD SERIES DESIGNATOR | SINGLE MOUNTING FACILITY UNEF |
| THROW QUANTITY | 3 |