← NSN Search
SWITCH,SENSITIVE
5930-00-853-7387NIIN 008537387InternationalEA · inactiveDEMIL ASOS SMSCatalog $41
FSC5930Switches
Suppliers
3
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
06032ANTENNA PRODUCTS CORPORATIONMINERAL WELLS, TXSAM
PN 7800-0070-001
53711NAVAL SEA SYSTEMS COMMANDWASHINGTON NAVY YARD, DCSAM
PN 571-6134008 ITEM 32
81349MILITARY SPECIFICATIONSSAM
PN M8805/1-036, MIL-PRF-8805/1, MIL-S-8805/1
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| ACTUATOR FREE POSITION HEIGHT | INCHES MINIMUM 1.062 AND INCHES MAXIMUM 1.188 |
| ACTUATOR ROLLER DIAMETER | INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.390 |
| ACTUATOR ROLLER WIDTH | INCHES MINIMUM 0.135 AND INCHES MAXIMUM 0.165 |
| BODY HEIGHT | INCHES MAXIMUM 0.984 |
| BODY LENGTH | INCHES MINIMUM 1.922 AND INCHES MAXIMUM 1.952 |
| BODY WIDTH | INCHES MINIMUM 0.662 AND INCHES MAXIMUM 0.702 |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES MINIMUM 0.998 AND INCHES MAXIMUM 1.002 |
| CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | AMPERES RESISTIVE DC 2.000 AND AMPERES INDUCTIVE DC 1.000 AND AMPERES LAMP DC 1.500 AND AMPERES RESISTIVE AC 15.000 AND AMPERES INDUCTIVE AC 15.000 AND AMPERES LAMP AC 1.500 |
| INCLOSURE TYPE | UNINCLOSED |
| MATERIAL | CASE PLASTIC |
| MAXIMUM VOLTAGE RATING IN VOLTS | AC 115.0 AND DC 28.0 |
| NONPILE-UP CONTACT ARRANGEMENT | SINGLE SWITCH UNIT POLE, DOUBLE THROW, ONE POSITION MOMENTARY 1 |
| SWITCH ACTUATING FORCE | OUNCES MAXIMUM 6.0 |
| SWITCH RELEASE FORCE | OUNCES MINIMUM 0.5 |
| TERMINAL TYPE AND QUANTITY | SCREW 3 |
| TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILS8805 |
| UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.139 AND INCHES MAXIMUM 0.143 |
Open buys
SPE7M126U5816
DIBBS · quotes by Sep 24, 2026 · UNRESTRICTED