← NSN Search
CIRCUIT BREAKER
5925-00-998-1633NIIN 009981633InternationalEA · activeDEMIL ASOS SMSCatalog $15
FSC5925Circuit Breakers
Suppliers
6
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
0U583SAE INTERNATIONALWARRENDALE, PASAM
PN AS26574, AS58091, MS26574-2-1/2, SAE-AS58091
3T899DALLAS AVIONICS, INC.DALLAS, TXSAM
PN 7274-2-2.5
81343SOCIETY OF AUTOMOTIVE ENGINEERS INCWARRENDALE, PASAM
PN AS26574, AS58091, MS26574-2 1/2
81349MILITARY SPECIFICATIONSSAM
PN MIL-C-5809, MS26574-2 1/2
82647SENSATA TECHNOLOGIES, INC.ATTLEBORO, MASAM
PN 7274-2-2 1/2
96906MILITARY STANDARDSSAM
PN MS26574-2-1-2, MS26574-21/2A
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| ACTUATOR FUNCTION | TRIP-RESET |
| ACTUATOR POSITION DESIGNATION | AT POLE ONE |
| BODY LENGTH | INCHES MAXIMUM 0.780 |
| BODY WIDTH | INCHES MAXIMUM 0.580 |
| BUSHING LENGTH | INCHES NOMINAL 0.359 |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES NOMINAL 0.593 |
| CIRCUIT PROTECTION TYPE | SINGLE LOCATION OVERCURRENT |
| FREQUENCY IN HERTZ | 400.0 |
| INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | EXPLOSION RESISTANT AND MOISTURE RESISTANT |
| INTERNAL TRIP RELEASE CONFIGURATION | SINGLE LOCATION SERIES TRIP |
| MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE |
| MANUAL ACTUATOR TYPE AND QUANTITY | PUSH-PULL 1 |
| MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | SINGLE LOCATION AMPERES AC 2.5 AND AMPERES DC 2.5 |
| MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | SINGLE LOCATION AC 800.0 AND DC 800.0 |
| MOUNTING FACILITY TYPE AND QUANTITY | THREADED BUSHING 1 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.420 |
| NOMINAL THREAD SIZE | INCHES 0.438 |
| OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | SINGLE LOCATION AC 200.0 AND DC 28.0 |
| POLE QUANTITY | 1 |
| RESET METHOD | MANUAL |
| SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S26574 |
| STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| TERMINAL TYPE AND QUANTITY | TAB W/SCREW 2 |
| TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-5809 |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UN |
| TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | SINGLE LOCATION MINIMUM AT 200 PCT 2.000 AND MAXIMUM AT 200 PCT 20.000 |
| TRIP RELEASE AMBIENT TEMP RATING | SINGLE LOCATION CELSIUS NOMINAL 25.0 |
| TRIP RELEASE CHARACTERISTIC | SINGLE LOCATION TIME DELAY |
| TRIP RELEASE METHOD | SINGLE LOCATION THERMAL |
| ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 145.0 |