CAPACITOR,FIXED,PLASTIC DIELECTR
Price to win
From deduped DIBBS award lines (unit cost × quantity). Not a bid recommendation — observed history only.
Average unit cost
$7.78
Weighted average
$7.78
Weighted by quantity
Observed range
$7.78–$7.78
Coverage
1 award
Nov 22, 1984 – Nov 22, 1984
Average: $7.78 · Weighted avg: $7.78 · Range: $7.78–$7.78 · Based on 1 award, Nov 22, 1984–Nov 22, 1984.
Trend chart needs at least 4 priced awards in this window (1 available).
DIBBS award history
Distinct award lines for this NSN (deduped). Line total is unit cost × quantity.
1 distinct award line
Manufacturers who have won this NSN
Distinct CAGEs with a confirmed DIBBS award line for this part — each opens the manufacturer page.
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
PN 711239
PN 196P82491S2
PN CQR39A1KB824K3P, MIL-C-19978/16, MIL-PRF-19978/16
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| BODY DIAMETER | INCHES NOMINAL 0.733 |
| BODY LENGTH | INCHES NOMINAL 1.688 |
| CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 0.820 |
| CASE INSULATION MATERIAL | PLASTIC |
| DIELECTRIC MATERIAL | PAPER AND PLASTIC POLYETHYLENE TEREPHTHALATE (PET)(POLYESTER) |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | MEGOHM-MICROFARADS 20.0 |
| INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHM-MICROFARADS 15000.0 |
| INTERNAL ELECTRICAL CONNECTION TYPE | EXTENDED FOIL |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 100.0 |
| NONDERATED OPERATING TEMP | CELSIUS MINIMUM -65.0 AND CELSIUS MAXIMUM 125.0 |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.1000 |
| RELIABILITY INDICATOR | ESTABLISHED |
| SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-19978 TO 16 |
| TERMINAL DIAMETER | INCHES NOMINAL 0.032 |
| TERMINAL LENGTH | INCHES MINIMUM 1.625 |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-19978 |
| TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -10.00 TO 10.00 |
Open buys
DIBBS · quotes by Oct 1, 2026 · UNRESTRICTED