RESISTOR NETWORK,FIXED,FILM
Price to win
From deduped DIBBS award lines (unit cost × quantity). Not a bid recommendation — observed history only.
Average unit cost
$5.49
Weighted average
$6.90
Weighted by quantity
Observed range
$3.02–$7.95
Coverage
2 awards
Feb 23, 1996 – Jul 30, 2025
Average: $5.49 · Weighted avg: $6.90 · Range: $3.02–$7.95 · Based on 2 awards, Feb 23, 1996–Jul 30, 2025.
Trend chart needs at least 4 priced awards in this window (2 available).
DIBBS award history
Distinct award lines for this NSN (deduped). Line total is unit cost × quantity.
2 distinct award lines
Manufacturers who have won this NSN
Distinct CAGEs with a confirmed DIBBS award line for this part — each opens the manufacturer page.
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
PN M8340102K2003GB, MIL-PRF-83401/2, MIL-R-83401/2
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 |
| BODY HEIGHT | INCHES MAXIMUM 0.180 |
| BODY LENGTH | INCHES MINIMUM 0.784 AND INCHES MAXIMUM 0.876 |
| BODY WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.305 |
| CUBIC MEASURE | CUBIC INCHES 0.045 |
| ELECTRICAL RESISTANCE | EACH RESISTOR KILOHMS 200.000 |
| END ITEM IDENTIFICATION | DTTSTSTADPTC1 |
| IDENTICAL VALUE RESISTOR QUANTITY | 15 |
| INCLOSURE METHOD | ENCAPSULATED |
| POWER DISSIPATION RATING IN WATTS | LOCATION NOT OTHERWISE SPECIFIED TOTAL NETWORK 1.500 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 |
| SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-83401 TO 2 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 |
| TERMINAL LENGTH | INCHES MINIMUM 0.105 AND INCHES MAXIMUM 0.215 |
| TERMINAL QUANTITY | 16 |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TERMINAL WIDTH | INCHES MINIMUM 0.015 AND INCHES MAXIMUM 0.022 |
| TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-83401 |
Open buys
DIBBS · quotes by Oct 5, 2026 · UNRESTRICTED