← NSN Search
RESISTOR,VARIABLE,NONWIRE WOUND,
5905-01-187-6045NIIN 011876045USAEA · activeDEMIL ASOS SMSCatalog $32
FSC5905Resistors
Suppliers
5
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
01121ROCKWELL AUTOMATION, INC.MILWAUKEE, WISAM
PN G8744
12697CLAROSTAT SENSORS AND CONTROLSEL PASO, TXSAM
PN G8744
35627PRECISION ELECTRONICS CORPORATIONNORTH YORK, ONSAM
PN C10572-3-501C
81755LOCKHEED MARTIN CORPORATIONFORT WORTH, TXSAM
PN C10572-3-501C
9009HJEDNOLITY INDEKS MATERIALOWY -NO CITY, KUJAWSKO-POMORSKIESAM
PN 5905PL0646965
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| BODY DIAMETER | INCHES NOMINAL 0.500 |
| BODY LENGTH | INCHES MAXIMUM 0.688 |
| DEVICE DESIGN TYPE | AT 10:00 OCLOCK NONTURN |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 270.0 |
| ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 500.000 |
| FIRST FLAT LENGTH | INCHES NOMINAL 0.312 |
| FLAT HEIGHT | INCHES NOMINAL 0.094 |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| MAXIMUM RUNNING TORQUE | INCH-OUNCES 3.00 |
| MAXIMUM STARTING TORQUE | INCH-OUNCES 3.00 |
| MAXIMUM STOP TORQUE | INCH-OUNCES 64.00 |
| MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.250 |
| MOUNTING METHOD | STANDARD BUSHING |
| NONTURN DEVICE RADIUS | INCHES NOMINAL 0.245 |
| OVERALL DIAMETER | INCHES MAXIMUM 0.516 |
| OVERALL LENGTH | INCHES MAXIMUM 1.462 |
| POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.250 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -55 DEG CELSIUS SINGLE SECTION 0.0 TO 5.6 AND -25 DEG CELSIUS SINGLE SECTION 0.0 TO 3.1 AND 0 DEG CELSIUS SINGLE SECTION 0.0 TO 1.8 AND 85 DEG CELSIUS SINGLE SECTION -1.8 TO 1.8 AND 85 DEG CELSIUS SINGLE SECTION 0.0 TO 4.4 |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 295.0 |
| SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SECTION QUANTITY | 1 |
| SHAFT BEARING TYPE | BEARING |
| SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| SHAFT LENGTH | INCHES NOMINAL 0.750 |
| TERMINAL LOCATION | REAR END |
| TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 81755-C10572 |
Open buys
SPE7M126U5855
DIBBS · quotes by Sep 24, 2026 · TOTAL SMALL BUSINESS