← NSN Search
RESISTOR,VARIABLE,WIRE WOUND,PRE
5905-01-180-1145NIIN 011801145USAEA · activeDEMIL ASOS SMSCatalog $118
FSC5905Resistors
Suppliers
3
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
18053SUBMINIATURE INSTRUMENTS CORP.OGDEN, UTSAM
PN 290-6-502
56232LOCKHEED MARTIN CORPORATIONUNIONDALE, NYSAM
PN 338598
80294BOURNS INSTRUMENTS INCRIVERSIDE, CASAM
PN 3530S-507-502
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| BEARING TYPE | SHAFT SLEEVE |
| BODY DIAMETER | INCHES NOMINAL 0.875 |
| BODY LENGTH | INCHES NOMINAL 0.487 |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 350.0 |
| ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| FEATURES PROVIDED | HUMIDITY PROOF |
| FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.15 |
| MAXIMUM STARTING TORQUE | INCH-OUNCES 0.15 |
| MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.250 |
| MOUNTING METHOD | STANDARD BUSHING |
| OVERALL DIAMETER | INCHES NOMINAL 1.250 |
| OVERALL LENGTH | INCHES NOMINAL 1.237 |
| POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND LOCATION | GOLD TER-INAL SURFACES |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | INCHES MAXIMUM 0.2498 |
| SHAFT END PLAY | INCHES 0.003 |
| SHAFT LENGTH | INCHES NOMINAL 0.750 |
| SHAFT RADIAL PLAY | INCHES 0.003 |
| SHAFT RUNOUT | INCHES 0.001 |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | SINGLE SECTION 175.0 |
| TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION SINGLE SECTION -2.0 TO 2.0 |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |