← NSN Search
RESISTOR,VARIABLE,NONWIRE WOUND,
5905-01-098-1258NIIN 010981258USAEA · activeDEMIL ASOS SMSCatalog $266
FSC5905Resistors
Suppliers
3
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
18053SUBMINIATURE INSTRUMENTS CORP.OGDEN, UTSAM
PN 232-1011
18876US ARMY AVIATION AND MISSILE COMMANDREDSTONE CENTRAL, ALSAM
PN 13059259
29056WOODARD ELECTRIC INCHARTSELLE, ALSAM
PN 13059259
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 160.0 |
| BEARING TYPE | SHAFT BEARING |
| BODY DIAMETER | INCHES NOMINAL 2.000 |
| BODY LENGTH | INCHES MAXIMUM 1.000 |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 80.0 |
| ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.000 |
| FEATURES PROVIDED | HUMIDITY PROOF |
| FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION EQUATION |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -1.00 TO 1.00 |
| LATERAL RUNOUT | INCHES 0.001 |
| MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| MOUNTING LIP DIAMETER | INCHES NOMINAL 2.0000 |
| MOUNTING METHOD | CLAMP RING(S) |
| PILOT DIAMETER | INCHES NOMINAL 1.8750 |
| PILOT DIAMETER RUNOUT | INCHES 0.00100 |
| PILOT LENGTH | INCHES NOMINAL 0.0630 |
| POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.1 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 80.0 |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2498 |
| SHAFT END PLAY | INCHES 0.00500 |
| SHAFT LENGTH | INCHES NOMINAL 0.437 |
| SHAFT RADIAL PLAY | INCHES 0.001 |
| SHAFT RUNOUT | INCHES 0.001 |
| SPECIAL FEATURES | HOLE THROUGH SHAFT 0.0627 IN. DIA LOCATED 0.375 IN. FROM MOUNTING SURFACE |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | SINGLE SECTION 2500.0 |
| TAP LOCATION TOLERANCE PER SECTION | OHMS SINGLE SECTION -5.0 TO 5.0 |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -400.0 TO 400.0 |
| TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | TURRET 4 |
| TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 18876-13059259 |
| UNDERCUT DIAMETER | INCHES NOMINAL 1.875 |