← NSN Search
RESISTOR,VARIABLE,WIRE WOUND,PRE
5905-01-037-8119NIIN 010378119USAEA · activeDEMIL ASOS SMSCatalog $125
FSC5905Resistors
Suppliers
2
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
18053SUBMINIATURE INSTRUMENTS CORP.OGDEN, UTSAM
PN 224-1003
80294BOURNS INSTRUMENTS INCRIVERSIDE, CASAM
PN 3437512-203
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| BEARING TYPE | SHAFT BEARING |
| BODY DIAMETER | INCHES NOMINAL 1.812 |
| BODY LENGTH | INCHES NOMINAL 1.750 |
| DEVICE DESIGN TYPE | AT 12:00 OCLOCK |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 3600.0 |
| ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.0 |
| FEATURES PROVIDED | HERMETICALLY SEALED |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.15 TO 0.15 |
| LATERAL RUNOUT | INCHES 0.005 |
| MAXIMUM RUNNING TORQUE | INCH-OUNCES 2.00 |
| MAXIMUM STARTING TORQUE | INCH-OUNCES 2.00 |
| MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| MOUNTING METHOD | STANDARD BUSHING |
| NONTURN DEVICE RADIUS | INCHES NOMINAL 0.562 |
| PILOT DIAMETER RUNOUT | INCHES 0.002 |
| POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 5.0 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 3600.0 |
| SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| SHAFT END PLAY | INCHES 0.005 |
| SHAFT LENGTH | INCHES NOMINAL 0.812 |
| SHAFT RADIAL PLAY | INCHES 0.025 |
| SHAFT RUNOUT | INCHES 0.002 |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |