← NSN Search
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-00-945-7355NIIN 009457355InternationalEA · activeDEMIL ASOS SMSCatalog $52
FSC5905Resistors
Suppliers
6
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
16236DLA WEAPONS SUPPORT (COLUMBUS)COLUMBUS, OHSAM
PN DMS 84013B
18053SUBMINIATURE INSTRUMENTS CORP.OGDEN, UTSAM
PN 900-6-253
28527L3HARRIS TECHNOLOGIES, INC.CLIFTON, NJSAM
PN C2377927G1
28528ITT INDUSTRIES INC ITT AEROSPACECLIFTON, NJSAM
PN C2377927G1
80294BOURNS INSTRUMENTS INCRIVERSIDE, CASAM
PN 3020L1-253
92755NORTHROP GRUMMAN SYSTEMS CORPLINTHICUM HEIGHTS, MDSAM
PN 212075-1
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 200.0 |
| BODY HEIGHT | INCHES MINIMUM 0.325 AND INCHES MAXIMUM 0.335 |
| BODY LENGTH | INCHES MINIMUM 1.245 AND INCHES MAXIMUM 1.255 |
| BODY WIDTH | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255 |
| ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 25.0 |
| LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 1.000 |
| MOUNTING FACILITY QUANTITY | 2 |
| MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.087 |
| MOUNTING METHOD | UNTHREADED HOLE(S) |
| OVERALL HEIGHT | INCHES MINIMUM 0.325 AND INCHES MAXIMUM 0.335 |
| OVERALL WIDTH | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255 |
| POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 3.75 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 9000.0 |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| SHAFT LENGTH | INCHES NOMINAL 0.067 |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |