← NSN Search
RESISTOR,VARIABLE,WIRE WOUND,PRE
5905-00-826-8902NIIN 008268902InternationalEA · activeDEMIL ACatalog $10
FSC5905Resistors
Suppliers
6
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
18053SUBMINIATURE INSTRUMENTS CORP.OGDEN, UTSAM
PN 3507S1-503
19200COMBAT CAPABILITIES DEVELOPMENTPICATINNY ARSENAL, NJSAM
PN 10554949-1
48306NORTHROP GRUMMAN SUPPORT SERVICESANNAPOLIS JUNCTION, MDSAM
PN 128C576H10
80294BOURNS INSTRUMENTS INCRIVERSIDE, CASAM
PN 3507S1-503, 3590S-2-503
97942NORTHROP GRUMMAN SYSTEMS CORPORATIONLINTHICUM HEIGHTS, MDSAM
PN 128C576H10
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| BODY DIAMETER | INCHES NOMINAL 0.880 |
| BODY LENGTH | INCHES NOMINAL 1.060 |
| ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 50.000 |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| MAXIMUM RUNNING TORQUE | INCH-OUNCES 2.00 |
| MAXIMUM STOP TORQUE | INCH-OUNCES 48.00 |
| MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.310 |
| MOUNTING METHOD | STANDARD BUSHING |
| OVERALL DIAMETER | INCHES NOMINAL 1.060 |
| OVERALL LENGTH | INCHES NOMINAL 1.930 |
| POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | INCHES NOMINAL 0.2498 |
| SHAFT LENGTH | INCHES NOMINAL 0.500 |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 2 |
| TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 89661-128C576410 |