← NSN Search
RESISTOR,VARIABLE,WIRE WOUND,PRE
5905-00-825-2039NIIN 008252039InternationalEA · activeDEMIL ASOS SMSCatalog $62
FSC5905Resistors
Suppliers
4
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
02111VISHAY SPRAGUE INCONTARIO, CASAM
PN 200-653
10001NAVAIR AND NAVSEA MANAGED ORIGINALWASHINGTON, DCSAM
PN 2041716
18053SUBMINIATURE INSTRUMENTS CORP.OGDEN, UTSAM
PN 1764-2
36090LOCKHEED MARTIN LIBRASCOPEGLENDALE, CASAM
PN L603000010
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 50.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 110.0 |
| BODY DIAMETER | INCHES MINIMUM 1.744 AND INCHES MAXIMUM 1.750 |
| BODY LENGTH | INCHES MINIMUM 0.960 AND INCHES MAXIMUM 1.080 |
| ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.000 |
| FIRST FLAT LENGTH | INCHES MINIMUM 0.747 AND INCHES MAXIMUM 0.753 |
| FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| MOUNTING LIP DEPTH | INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0980 |
| MOUNTING LIP DIAMETER | INCHES MAXIMUM 1.7750 |
| MOUNTING METHOD | CLAMP RING(S) |
| OVERALL DIAMETER | INCHES MAXIMUM 1.995 |
| OVERALL LENGTH | INCHES MINIMUM 2.397 AND INCHES MAXIMUM 2.523 |
| PILOT DIAMETER | INCHES MINIMUM 1.5420 AND INCHES MAXIMUM 1.5620 |
| PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -2.0 TO 2.0 |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2497 |
| SHAFT LENGTH | INCHES MINIMUM 1.437 AND INCHES MAXIMUM 1.443 |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | SINGLE SECTION 150.0 |
| TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION SINGLE SECTION -2.0 TO 2.0 |
| TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | TURRET 4 |
| UNDERCUT DIAMETER | INCHES NOMINAL 1.250 |
| UNDERCUT WIDTH | INCHES NOMINAL 0.0730 |