RESISTOR,VARIABLE,WIRE WOUND,NON
DIBBS awards by month · trailing 12 mo
2 total
Price to win
From deduped DIBBS award lines (unit cost × quantity). Not a bid recommendation — observed history only.
Average unit cost
$797.00
Weighted average
$709.55
Weighted by quantity
Observed range
$169–$1,123
Coverage
4 awards
Oct 8, 2004 – Sep 9, 2026
Average: $797.00 · Weighted avg: $709.55 · Range: $168.77–$1,123.00 · Based on 4 awards, Oct 8, 2004–Sep 9, 2026.
Unit cost by award date · 4 priced lines
DIBBS award history
Distinct award lines for this NSN (deduped). Line total is unit cost × quantity.
4 distinct award lines
| Date | Manufacturer | Qty × unit | Total | Contract |
|---|---|---|---|---|
| Sep 9, 2026 | 8N187TTI INC.FORT WORTH, TXSAM | 1 × $1,123.00 | $1,123 | SPE7M126PA151 |
| Jun 30, 2026 | 8N187TTI INC.FORT WORTH, TXSAM | 1 × $1,123.00 | $1,123 | SPE7M326V3461 |
| Nov 18, 2024 | 1E4B5TTI INCFORT WORTH, TXSAM | 4 × $773.22 | $3,093 | SPE7M525V1039P00001 |
| Oct 8, 2004 | 1CW50MJO INDUSTRIES, INC.ORLANDO, FLSAM | 2 × $168.77 | $338 | SP090505V0127 |
Manufacturers who have won this NSN
Distinct CAGEs with a confirmed DIBBS award line for this part — each opens the manufacturer page.
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
PN D4059-523 PC47
PN M22/03-0022-2SG, M22/03-00222UG, MIL-PRF-22/3, MILR22-3 +1 more
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 340.0 |
| BODY DIAMETER | INCHES MAXIMUM 1.680 |
| BODY LENGTH | INCHES MAXIMUM 1.410 |
| CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 12:00 OCLOCK |
| ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.500 |
| MAXIMUM STARTING TORQUE | INCH-OUNCES 40.00 |
| MAXIMUM STOP TORQUE | INCH-OUNCES 240.00 |
| MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.453 AND INCHES MAXIMUM 0.547 |
| MOUNTING METHOD | LOCKING BUSHING |
| NONTURN DEVICE RADIUS | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| OVERALL DIAMETER | INCHES MAXIMUM 2.260 |
| OVERALL LENGTH | INCHES MAXIMUM 2.707 |
| POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 25.0 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 275.0 AND MAXIMUM 305.0 |
| SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| SHAFT LENGTH | INCHES MINIMUM 1.203 AND INCHES MAXIMUM 1.297 |
| SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22 TO 3 |
| TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22 |
Open buys
DIBBS · quotes by Sep 28, 2026 · UNRESTRICTED