RESISTOR,FIXED,WIRE WOUND,INDUCT
Price to win
From deduped DIBBS award lines (unit cost × quantity). Not a bid recommendation — observed history only.
Average unit cost
$21.47
Weighted average
$10.36
Weighted by quantity
Observed range
$6.51–$36.56
Coverage
3 awards
Jan 17, 2006 – Nov 3, 2007
Average: $21.47 · Weighted avg: $10.36 · Range: $6.51–$36.56 · Based on 3 awards, Jan 17, 2006–Nov 3, 2007.
Trend chart needs at least 4 priced awards in this window (3 available).
DIBBS award history
Distinct award lines for this NSN (deduped). Line total is unit cost × quantity.
3 distinct award lines
Manufacturers who have won this NSN
Distinct CAGEs with a confirmed DIBBS award line for this part — each opens the manufacturer page.
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
PN 747-8969-000
PN 1823133-2
PN MIL-PRF-39009/1, MIL-R-39009/1, RER65F1620R
PN RH-10 160OHMS, RH-10-160 0HMS 1, RH10X00D160R0H
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| AMBIENT TEMP AT FULL RATED POWER | CELSIUS 25.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| BODY HEIGHT | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.437 |
| BODY LENGTH | INCHES MINIMUM 0.688 AND INCHES MAXIMUM 0.812 |
| BODY WIDTH | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.500 |
| CUBIC MEASURE | CUBIC INCHES 0.133 |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| ELECTRICAL RESISTANCE | OHMS 162.000 |
| INCLOSURE TYPE | ENCASED |
| MOUNTING HOLE SIZE | INCHES MINIMUM 0.089 AND INCHES MAXIMUM 0.099 |
| POWER DISSIPATION RATING IN WATTS | FREE AIR 6.000 |
| REACTANCE CHARACTERISTIC | INDUCTIVE |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| RELIABILITY INDICATOR | ESTABLISHED |
| RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39009 TO 1 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| TERMINAL LENGTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.374 |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TERMINAL WIDTH | INCHES MINIMUM 0.140 |
| TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39009 |
| UNPACKAGED UNIT WEIGHT | GRAMS 8.0 |
Open buys
DIBBS · quotes by Sep 21, 2026 · UNRESTRICTED