← NSN Search
BRACKET,ANGLE
5340-01-036-9822NIIN 010369822USAEA · activeDEMIL ASOS SMSCatalog $31
FSC5340Hardware
Suppliers
3
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
11449TURBO POWER & MARINE SYSTEM INC SUBWEST PALM BEACH, FLSAM
PN 759654
77445RTX CORPORATIONMIDDLETOWN, CTSAM
PN 759654
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| FIRST LEG ANGLE | DEGREES NOMINAL 80.0 |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| FIRST LEG END RADIUS | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
| FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.216 AND INCHES MAXIMUM 0.226 |
| FIRST LEG LENGTH | INCHES MINIMUM 0.620 AND INCHES MAXIMUM 0.660 |
| FIRST LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| FIRST LEG WIDTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S 5504 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| SECOND LEG END RADIUS | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
| SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.276 AND INCHES MAXIMUM 0.286 |
| SECOND LEG LENGTH | INCHES MINIMUM 2.256 AND INCHES MAXIMUM 2.296 |
| SECOND LEG OFFSET ANGLE | DEGREES MINIMUM 5.53 AND DEGREES MAXIMUM 5.56 |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| SECOND LEG WIDTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |