GASKET
Price to win
From deduped DIBBS award lines (unit cost × quantity). Not a bid recommendation — observed history only.
Average unit cost
$1.02
Weighted average
$0.64
Weighted by quantity
Observed range
$0.35–$1.57
Coverage
8 awards
Oct 2, 1986 – Oct 29, 2019
Average: $1.02 · Weighted avg: $0.64 · Range: $0.35–$1.57 · Based on 8 awards, Oct 2, 1986–Oct 29, 2019.
Unit cost by award date · 8 priced lines
DIBBS award history
Distinct award lines for this NSN (deduped). Line total is unit cost × quantity.
8 distinct award lines
| Date | Manufacturer | Qty × unit | Total | Contract |
|---|---|---|---|---|
| Oct 29, 2019 | 3Y184CUPP'S INDUSTRIAL SUPPLY, INCPHOENIX, AZSAM | 400 × $1.03 | $412 | SPE5EM20P0156 |
| Oct 3, 2016 | 3Y184CUPP'S INDUSTRIAL SUPPLY, INCPHOENIX, AZSAM | 275 × $1.05 | $289 | SPE5EM17V0021 |
| Sep 27, 2006 | 44HT7GASKETS ORINGS RUBBER INCPLAINS, MTSAM | 1,436 × $0.57 | $824 | SPM5M106V3386 |
| Dec 6, 2005 | 27786STAFF GASKET MFG.NEW YORK, NYSAM | 434 × $0.97 | $421 | SPM5M406V0364 |
| Nov 2, 2005 | 07232ELECTRO-LINE INCDAYTON, OHSAM | 357 × $1.25 | $446 | SPM5M406V0195 |
| Sep 16, 2005 | 27786STAFF GASKET MFG.NEW YORK, NYSAM | 316 × $1.40 | $442 | SPM56005V7420 |
| Sep 13, 2005 | 27786STAFF GASKET MFG.NEW YORK, NYSAM | 270 × $1.57 | $424 | SPM56005M2527 |
| Oct 2, 1986 | 03350GENERAL ELECTRIC COMPANYMOUNT LAUREL, NJSAM | 3,604 × $0.35 | $1,261 | DAAE0786P5897 |
Manufacturers who have won this NSN
Distinct CAGEs with a confirmed DIBBS award line for this part — each opens the manufacturer page.
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
PN 11627514
PN 10086521
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| APERTURE DIAMETER | INCHES MINIMUM 1.240 AND INCHES MAXIMUM 1.280 |
| BOLT HOLE QUANTITY | 4 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 1.500 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 1.500 |
| CROSS-SECTIONAL THICKNESS | INCHES NOMINAL 0.016 |
| HOLE DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.280 AND INCHES MAXIMUM 0.300 |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | INCHES MINIMUM 0.496 AND INCHES MAXIMUM 0.500 |
| OVERALL LENGTH | INCHES MINIMUM 2.180 AND INCHES MAXIMUM 2.220 |
| OVERALL WIDTH | INCHES MINIMUM 2.000 AND INCHES MAXIMUM 2.040 |
| SPECIAL FEATURES | REV G AND ABOVE IS ASBESTOS FREE |
Open buys
DIBBS · quotes by Oct 5, 2026 · UNRESTRICTED