← NSN Search
BOLT,SHEAR
5306-01-315-1533NIIN 013151533USAEA · activeDEMIL ASOS SMSCatalog $1
FSC5306Bolts
Suppliers
1
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
80205NATIONAL AEROSPACE STANDARDSARLINGTON, VASAM
PN NAS6603H11
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| FASTENER LENGTH | INCHES MINIMUM 1.018 AND INCHES MAXIMUM 1.048 |
| GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| GRIP LENGTH | INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.698 |
| HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| HEAD HEIGHT | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.125 |
| HOLE DIAMETER | INCHES MINIMUM 0.046 AND INCHES MAXIMUM 0.056 |
| HOLE QUANTITY | 3 |
| HOLE TYPE | DRILLED |
| MATERIAL | OVERALL STEEL COMP E4340 OR STEEL COMP 8740 |
| MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6322 |
| MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| NOMINAL THREAD DIAMETER | INCHES 0.190 |
| SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS6604 |
| SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2,CL 2 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | INCHES MINIMUM 0.320 AND INCHES MAXIMUM 0.370 |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| WIDTH BETWEEN FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
Open buys
SPE4A626T27QQ
DIBBS · quotes by Sep 17, 2026 · UNRESTRICTED