← NSN Search
SCREW,CLOSE TOLERANCE
5305-01-021-9159NIIN 010219159USAEA · activeDEMIL ASOS SMSCatalog $319
FSC5305Screws
Suppliers
4
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
29372HOWMET GLOBAL FASTENING SYSTEMS INC.TORRANCE, CASAM
PN CA2658-5-18
80205NATIONAL AEROSPACE STANDARDSARLINGTON, VASAM
PN MS3369B518
84256AVIBANK MFG., INC.NORTH HOLLYWOOD, CASAM
PN AS169-5-18
96906MILITARY STANDARDSSAM
PN MS3369B518
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.490 AND INCHES MAXIMUM 1.510 |
| FASTENER LENGTH | INCHES MINIMUM 1.603 AND INCHES MAXIMUM 1.623 |
| GRIP DIAMETER | INCHES MINIMUM 0.3112 AND INCHES MAXIMUM 0.3117 |
| GRIP LENGTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| HEAD HEIGHT | INCHES MINIMUM 0.157 AND INCHES MAXIMUM 0.172 |
| MATERIAL | OVERALL STEEL COMP XM-13 |
| MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| NOMINAL THREAD DIAMETER | INCHES 0.312 |
| SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| SPECIAL FEATURES | RETAINING ELEMENT IN SHANK |
| SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| SURFACE TREATMENT | OVERALL PASSIVATE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | INCHES MINIMUM 0.306 AND INCHES MAXIMUM 0.357 |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
Open buys
SPE4A626T30HF
DIBBS · quotes by Sep 23, 2026 · SDVOSB