SCREW,CAP,SOCKET HEAD
Price to win
From deduped DIBBS award lines (unit cost × quantity). Not a bid recommendation — observed history only.
Average unit cost
$3.30
Weighted average
$0.39
Weighted by quantity
Observed range
$0.35–$6.25
Coverage
2 awards
Apr 28, 1977 – Oct 10, 2018
Average: $3.30 · Weighted avg: $0.39 · Range: $0.35–$6.25 · Based on 2 awards, Apr 28, 1977–Oct 10, 2018.
Trend chart needs at least 4 priced awards in this window (2 available).
DIBBS award history
Distinct award lines for this NSN (deduped). Line total is unit cost × quantity.
2 distinct award lines
Manufacturers who have won this NSN
Distinct CAGEs with a confirmed DIBBS award line for this part — each opens the manufacturer page.
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
PN 280-615-0816
PN MS16995-30
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY CONDITION A |
| DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
| FASTENER LENGTH | INCHES MINIMUM 0.970 AND INCHES MAXIMUM 1.000 |
| HEAD DIAMETER | INCHES MINIMUM 0.262 AND INCHES MAXIMUM 0.270 |
| HEAD HEIGHT | INCHES MINIMUM 0.159 AND INCHES MAXIMUM 0.164 |
| MATERIAL | OVERALL STEEL COMP 304 |
| MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| NOMINAL THREAD DIAMETER | INCHES 0.164 |
| NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| SURFACE TREATMENT | OVERALL PASSIVATE |
| TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81348-FFS86 OR STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). 96906--S16995-30 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | INCHES MINIMUM 0.908 AND INCHES MAXIMUM 1.000 |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| WIDTH ACROSS FLATS | INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.143 |
Open buys
DIBBS · quotes by Oct 5, 2026 · UNRESTRICTED