← NSN Search
SCREW,CAP,SOCKET HEAD
5305-00-638-1327NIIN 006381327InternationalEA · inactiveDEMIL ASOS SMSCatalog $10
FSC5305Screws
Suppliers
3
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
10001NAVAIR AND NAVSEA MANAGED ORIGINALWASHINGTON, DCSAM
PN 12Z1196-68, 650269PC32
80205NATIONAL AEROSPACE STANDARDSARLINGTON, VASAM
PN MS24677-69
96906MILITARY STANDARDSSAM
PN MS24677-69
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| FASTENER LENGTH | INCHES NOMINAL 1.750 |
| HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 43.0 |
| HEAD DIAMETER | INCHES MINIMUM 0.550 AND INCHES MAXIMUM 0.562 |
| HEAD HEIGHT | INCHES MINIMUM 0.368 AND INCHES MAXIMUM 0.375 |
| HOLE DIAMETER | INCHES NOMINAL 0.067 |
| HOLE QUANTITY | 6 |
| HOLE TYPE | DRILLED |
| MATERIAL | OVERALL STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| NOMINAL THREAD DIAMETER | INCHES 0.375 |
| SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416 TYE 2 CLASS 3 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | INCHES MINIMUM 1.250 |
| THREAD QUANTITY PER INCH | 16 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| WIDTH ACROSS FLATS | INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.316 |
Open buys
SPE4A626T27HM
DIBBS · quotes by Sep 16, 2026 · UNRESTRICTED