← NSN Search
HULL SECTION,MIDGET SUBMARINE,MI
2040-01-701-4161NIIN 017014161USAEA · activeDEMIL QSOS SMSCatalog $755
FSC2040Marine Hardware and Hull Items
Suppliers
2
DIBBS awards
0
Total value
—
Last award
—
Approved manufacturers
Qualified to supply per MCRL — no confirmed DIBBS award on record for this NSN. Each CAGE opens the manufacturer page.
53711NAVAL SEA SYSTEMS COMMANDWASHINGTON NAVY YARD, DCSAM
PN 245-7383869, 245-7383869-27
96169ELECTRIC BOAT CORPORATIONGROTON, CTSAM
PN 26M01-4303-27
Characteristics
FLIS item characteristics from PUB LOG identification.
| Characteristic | Value |
|---|---|
| END ITEM IDENTIFICATION | NSSN CLASS PROPULSOR INCOMPRESSIBLE WEDGE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | WEDGE, INCOMPRESSIBLE, AFT COVER PORT FAIRING |
| PROPRIETARY CHARACTERISTICS | PACS |
| SPECIAL FEATURES | THE MAXIMUM STEP DROP, GAP ALLOWANCES AT THE OUTSIDE DIAMETER OF THE PROPULSOR SHALL BE: STEPS: 0.025"; DROPS: 0.050"; GAPS: 0.125"; PORT AND STARBOARD EDGES SHALL BE FLUSH TO WITHIN + OR - 0.050" OF ADJACENT STRUCTURE AREAS NOT CONFORMING TO THESE STEP, DROP; GAP ALLOWANCES MUST BE FAIRED IN WITHIN AN APPROVED INOMPRESSIBLE WEDGE MATERIAL OR APPROVED FAIRING COMPOUND; UNLESS OTHERWISE SPECIFIED ALL TAPERS OF INOMPRESSIBLE WEDGES AND FAIRINGS FACING FORWARD AND AFT SHALL BE A MINIMUM OF 10 TO 1; ALL TAPERS OF INCOMPRESSIBLE WEDGES AND FAIRINGS FACING PORT AND STARBOARD WILL BE BLENDED INTO THEIR CORRESPONDING 6 TO 1 MINIUMUM TAPERS; WHEN 2 OR MORE TAPERS MEET OR INTERSECT THE ANGLE INCLUDED BETWEEN THE TAPERS OF THE INTERSECTING WEDGES OR FAIRINGS SHALL BE NO LESS THAN THE ANGLE INCLUDED BETWEEN THE TAPER OF A STAND ALONE WEDGE OR FAIRING AND THE OUTSIDE DIAMETER OF THE PROPULSOR |
Open buys
SPE7M426T399P
DIBBS · quotes by Sep 21, 2026 · UNRESTRICTED